Looking to give your Dodge Charger a more aggressive and aerodynamic stance? The Vicrez V5R Style Rear Wing Spoiler (vz102240) is one of the best upgrades for Charger models from 2011 to 2023—including Scat Pack, Hellcat, and SXT trims. This rear spoiler provides a race-inspired look and improved downforce, all with a straightforward bolt-on installation.
🎥 Watch the Installation in Action
Want a visual walkthrough? Check out our full Vicrez V5R Spoiler installation video for Dodge Charger on our YouTube channel.
📦 What’s Included in the Box
When you order the Vicrez V5R Rear Spoiler, you’ll receive:
- V5R-style rear spoiler (pre-drilled for factory fitment)
- 3M VHB automotive-grade adhesive tape
- Full hardware kit (nuts, bolts, washers)
- Adhesive promoter for better bonding
⚙️ Tools & Materials Needed
To properly install your Vicrez Charger spoiler, you’ll need:
- 10mm socket or wrench
- Torx bit set (for trunk liner screws)
- Trim removal tool or panel popper
- Isopropyl alcohol (for surface cleaning)
- 3M adhesive promoter (included)
- Drill (optional, for clearing factory residue)
🔧 Step-by-Step Installation Guide
Step 1: Remove the OEM Trunk Liner
Open your trunk and remove the Torx screws and plastic clips holding the trunk liner. Gently peel it back to expose the bolts securing your stock spoiler.
Step 2: Take Off the Factory Spoiler
Use a 10mm wrench or socket to unscrew the factory spoiler bolts. Use a plastic pry tool to break the OEM 3M tape seal. Once loose, lift off the spoiler carefully and clean any adhesive residue using isopropyl alcohol.
Step 3: Prepare the Surface
Clean the trunk area where the new spoiler will be mounted. Apply the 3M adhesive promoter along the contact zones to ensure maximum bonding strength for the VHB tape.
Step 4: Install the Vicrez V5R Spoiler
Test-fit the Vicrez spoiler before applying tape or tightening bolts. Once aligned, apply the 3M tape to the spoiler’s base and secure it using the provided bolts. Gradually tighten the bolts to avoid misalignment or overtightening.
Step 5: Reassemble the Trunk
Reinstall the trunk liner, snap the clips back into place, and verify that everything is snug and secure.
💡 Pro Tips for a Perfect Spoiler Install
- Mark the placement using painter’s tape before fully committing.
- Let the 3M tape cure for 24 hours before washing the vehicle.
- If needed, drill slightly to remove any leftover debris in factory holes (no cutting or welding required).
Ready to Order
🚘 Why Choose the Vicrez V5R Rear Spoiler?
- Direct Bolt-On Fitment: Perfect fit for all 2011–2023 Dodge Charger trims.
- Track-Inspired Design: Improves downforce and elevates your Charger’s profile.
- Premium Finish: Durable UV-resistant construction, available in Matte Black or Gloss Black.
🔧 Pair It With:
Ready to Order
Ready to Order
Ready to Order
📢 Final Thoughts
Installing the Vicrez V5R Rear Wing Spoiler is a quick, high-impact upgrade that significantly enhances your Charger’s look and aerodynamics. Whether you’re building a show car or a daily driver with edge, this spoiler delivers serious style and performance.
Explore more Dodge Charger body kits, spoilers, and custom mods directly at Vicrez.com —your go-to destination for premium aftermarket parts engineered for both style and function.
