How to Install Vicrez 5″ Ceramic Exhaust Tips (vzp100109) on Your Dodge Charger (2015-2023)

How to Install Vicrez 5" Ceramic Exhaust Tips (vzp100109) on Your Dodge Charger (2015-2023) How to Install Vicrez 5" Ceramic Exhaust Tips (vzp100109) on Your Dodge Charger (2015-2023)
Ownership disclosure: VicrezDriver and Vicrez.com share ownership. Vicrez benefits from purchases made through its store. Editorial policy.

Upgrading your Dodge Charger’s exhaust tips is one of the easiest and most effective ways to enhance its aggressive look. The Vicrez 5″ Ceramic Black Exhaust Tips (vzp100109) provide a sleek, high-performance appearance while being durable and resistant to heat discoloration.

In this guide, we’ll walk you through the step-by-step installation process, including tools needed, pro tips, and a video tutorial.


🔧 Tools & Materials Needed

✔ 13mm socket & wrench (for clamp bolts)
✔ Crowbar or pry tool (for removing old tips)
✔ Gloves (optional but recommended)
✔ Vicrez 5″ Ceramic Black Exhaust Tips (vzp100109)


📥 Unboxing & First Impressions

The Vicrez 5″ Ceramic Black Exhaust Tips come in a sleek black ceramic finish, offering:
✅ Aggressive 5-inch diameter (vs. stock 3-4″ tips)
✅ Heat-resistant ceramic coating (prevents discoloration)
✅ Direct bolt-on fitment for 2015-2023 Dodge Charger (5.7L, 6.2L, 6.4L models)


🎥 Video Installation

🔧 Step-by-Step Installation Guide

Step 1: Loosen the Exhaust Clamp

  • Use a 13mm socket to loosen the clamp bolt holding the stock exhaust tip.
  • Once loose, wiggle the tip to remove it.

Step 2: Remove the Stock Exhaust Tip

  • Use a crowbar or pry tool to gently pull down the exhaust tip.
  • The stock tip should slide off with minimal effort.

Step 3: Test Fit the New Vicrez Tip

  • Slide the Vicrez 5″ Ceramic Black Tip onto the exhaust pipe.
  • Ensure it sits flush before tightening.

Step 4: Adjust & Tighten the Clamp

  • Slightly tighten the clamp bolt to hold the tip in place.
  • Adjust the angle for a straight or angled look (your preference).
  • Fully tighten the clamp once aligned.

Step 5: Repeat for the Other Side

  • Follow the same steps for the second exhaust tip.
  • Ensure both tips are evenly aligned for a symmetrical look.

Step 6: Final Check & Enjoy!

  • Double-check all clamps are secure.
  • Start the engine and inspect for any unusual vibrations.
  • Admire the massive upgrade in appearance!

💡 Pro Tips for Best Results

🔹 Clean the exhaust pipe before installation for a snug fit.
🔹 Use anti-seize lubricant on the clamp bolts for easier future adjustments.
🔹 For a deeper tone, consider pairing with an aftermarket cat-back exhaust.


🚀 Why Choose Vicrez Exhaust Tips?

✔ Factory-direct fitment – No cutting or welding required.
✔ Ceramic black finish – Resists heat discoloration & corrosion.
✔ Aggressive styling – Instantly upgrades your Charger’s rear end.


🛒 Get Yours Today!

Vicrez Exhaust Tip 5″ Inch Ceramic Black Set (vzp100109)
$239.89

Ready to Order

Ready to transform your Charger’s exhaust look? Grab your set here:
👉 Vicrez 5″ Ceramic Black Exhaust Tips (vzp100109)


📌 Final Thoughts

Installing Vicrez 5″ Ceramic Black Exhaust Tips is a quick, bolt-on mod that makes a huge visual impact. Whether you drive a Charger R/T, Scat Pack, or Hellcat, these tips give your ride a meaner, more premium look in under 30 minutes.

Add a comment

Leave a Reply

Your email address will not be published. Required fields are marked *