Upgrading your Dodge Charger’s exhaust tips is one of the easiest and most effective ways to enhance its aggressive look. The Vicrez 5″ Ceramic Black Exhaust Tips (vzp100109) provide a sleek, high-performance appearance while being durable and resistant to heat discoloration.
In this guide, we’ll walk you through the step-by-step installation process, including tools needed, pro tips, and a video tutorial.
🔧 Tools & Materials Needed
✔ 13mm socket & wrench (for clamp bolts)
✔ Crowbar or pry tool (for removing old tips)
✔ Gloves (optional but recommended)
✔ Vicrez 5″ Ceramic Black Exhaust Tips (vzp100109)
📥 Unboxing & First Impressions
The Vicrez 5″ Ceramic Black Exhaust Tips come in a sleek black ceramic finish, offering:
✅ Aggressive 5-inch diameter (vs. stock 3-4″ tips)
✅ Heat-resistant ceramic coating (prevents discoloration)
✅ Direct bolt-on fitment for 2015-2023 Dodge Charger (5.7L, 6.2L, 6.4L models)
🎥 Video Installation
🔧 Step-by-Step Installation Guide
Step 1: Loosen the Exhaust Clamp
- Use a 13mm socket to loosen the clamp bolt holding the stock exhaust tip.
- Once loose, wiggle the tip to remove it.
Step 2: Remove the Stock Exhaust Tip
- Use a crowbar or pry tool to gently pull down the exhaust tip.
- The stock tip should slide off with minimal effort.
Step 3: Test Fit the New Vicrez Tip
- Slide the Vicrez 5″ Ceramic Black Tip onto the exhaust pipe.
- Ensure it sits flush before tightening.
Step 4: Adjust & Tighten the Clamp
- Slightly tighten the clamp bolt to hold the tip in place.
- Adjust the angle for a straight or angled look (your preference).
- Fully tighten the clamp once aligned.
Step 5: Repeat for the Other Side
- Follow the same steps for the second exhaust tip.
- Ensure both tips are evenly aligned for a symmetrical look.
Step 6: Final Check & Enjoy!
- Double-check all clamps are secure.
- Start the engine and inspect for any unusual vibrations.
- Admire the massive upgrade in appearance!
💡 Pro Tips for Best Results
🔹 Clean the exhaust pipe before installation for a snug fit.
🔹 Use anti-seize lubricant on the clamp bolts for easier future adjustments.
🔹 For a deeper tone, consider pairing with an aftermarket cat-back exhaust.
🚀 Why Choose Vicrez Exhaust Tips?
✔ Factory-direct fitment – No cutting or welding required.
✔ Ceramic black finish – Resists heat discoloration & corrosion.
✔ Aggressive styling – Instantly upgrades your Charger’s rear end.
🛒 Get Yours Today!
Ready to Order
Ready to transform your Charger’s exhaust look? Grab your set here:
👉 Vicrez 5″ Ceramic Black Exhaust Tips (vzp100109)
📌 Final Thoughts
Installing Vicrez 5″ Ceramic Black Exhaust Tips is a quick, bolt-on mod that makes a huge visual impact. Whether you drive a Charger R/T, Scat Pack, or Hellcat, these tips give your ride a meaner, more premium look in under 30 minutes.
